Product Overview
Touch-up 10 ounce Bottle of Campania International Paint The nature of the Campania Patinas is to age over time. These hand-painted finishes are all sealed with a clear sealer and all colors are rated for outdoor use. The Touch-up bottle is a wonderful product for those who need to enhance the color of older Campania statues, fountains, benches, or planters, any of the cast stone or GFRC items made by Campania International. Depending on the color, the Touch-up kit will come with the bottles for each color in the patina and a bottle of clear sealer. To apply the paint, you will need at least two sponges, or sponge brushes, depending on the color of your stain. The colors are applied in layers as described in the instructions. For the best results Start with a clean surface, remove any algae or calcium built-up. Allow each layer to dry before applying the next color. Blend the colors into the existing finish. Finish with the sealer provided. Touch-up Application Instructions for CAST STONE & GFRC ITEMS: Bottle of touch up is ready to use as provided. Shake well before using. Dampen area with a wet sponge. Instructions For Single Colors: Alpine Stone (AS), English Moss(EM), Greystone (GS), Travertine (TR), Brownstone (BR) - see sealer instructions Apply a thin coat of stain with a clean sponge or brush. Allow to sit for a moment, then wipe off with a clean damp sponge or cloth. Allow to dry. Repeat as needed to achieve desired darkness. Instructions For Multiple Application Finishes:Copper Bronze (CB), Aged Limestone (AL), Nero Nuovo (NN), Pietra Vecchia (PN), and Ferro Rustic Nuovo (FN). Copper Bronze Finish (CB) Application Note: If only touching up a small chip area, you only need to dab on and blend #2 or #3 finish. Apply #1 Base Blue Tone Finish Allow to dry. Wet area, then sprinkle with #2 Black Color Finish Lightly apply #3 Highlight Brown Finish Aged Limestone Finish (AL) Application Note: If only touching up a small chip area, you only need to dab on and blend #2 or #3 finish. Apply #1 Base Light Brown Finish Allow to dry. Wet area, then sprinkle with #2 Dark Brown Color Finish Lightly apply #3 Highlight Green Finish Nero Nuovo Finish (NN) Application Apply 3 light coats of NN color, allowing to dry in between coats. Apply sealer. (See Sealer Instructions) Pietra Nuovo Finish (PN) Applicaton Note: If only touching up a small chip area, you only need to dab on and blend #2 finish. Apply 2 coats of PN1 base light brown finish. Allow to dry. Wet area, then apply PN2 brown finish Lightly apply sealer. (See Sealer Instructions) Ferro Rustico Nuovo Finish (FN) Application Note: If only touching up a small chip area, you only need to dab on and blend #2 or #3 finish. Apply 2 coats of FN1 base yellow finish. Allow to dry. Wet area, then apply 1 coat of FN2 orange finish. Apply a light mist of #3 finish. Lightly apply sealer. (see instructions) Lead Antique Finish (LA) Application Note: If only touching up a small chip area, you only need to dab on and blend #1 finish. Apply 2 coats of LA1 base grey finish. Allow to dry. Wet area, then apply CB1 blue tone finish. Lightly apply sealer. (see instructions) French Limestone Finish (FL) Application Note: If only touching up a small chip area, you only need to dab on and blend #2 finish. Apply 1 coat of AL1 base yellow finish. Allow to dry. Apply FL2 antique white finish, then wet the piece thoroughly and apply a light coat of bright white (FL3). Allow to dry. Lightly apply sealer. (see instructions below) SEALER INSTRUCTIONS: Area must be dry before the sealer is applied. Clean off any debris in the application area. Using a dry sponge or cloth, apply the sealer lightly over the area to be covered. Allow to dry.
