- Dimensions: 41.5"L x41.5"W x35.5"H
- Weight: 706 lbs
- Inside Top Measurement: 37.5"L x37.5"W
- Inside Bottom Measurement: 19"L x19"W
- Inside Height: 23.25"
- Base: 20.25"L x20.25"W
- Shown In Color: Alpine Stone
- Available in your choice of finish
- Hand crafted
- Finishes are hand applied by skilled artisans.
- Manufactured from high density cast stone
- Two drainage holes, one is approximately 3" Centered the other is approximately 2" Offset
In the winter, if a planter is to remain planted, they should be raised up off the ground making sure not to block the drainage hole. This allows the planter to drain and will prevent the planter from freezing to the ground. If the planter is not to be planted, it should be brought inside to a garage or shed. If this is not possible, follow the steps above, but turn the planter upside down to prevent it from filling with snow and ice. It should then be covered or wrapped with burlap or any absorbent material (old blanket/towel) and then wrapped with dark plastic to prevent it from accumulating moisture.
About Campania's Patinas:
Campania's Cast Stone products are available in a choice of thirteen (13) exclusive natural pigment stains. All of Campania's patinas are hand-applied in a multi-step process which produces unique and beautiful surface finishes intended to replicate naturally aged materials. Like stains for wood, each piece will accept the patinas in varying degrees of intensity, creating surface variations with distinctive character. Even when applied with the same process, this artisanal technique gives each piece a unique beauty and permits natural aging to occur seamlessly in an outdoor environment. Campania's Cast Stone Color Samples are available for purchase here.
Please note that due to the hand application process photography, actual colors may vary from those depicted here.
Why Choose Campania's Cast Stone?
Campania proudly manufactures its Cast Stone products in the USA using locally sourced, natural materials. All of Campania's Cast Stone pieces are manufactured using a proprietary, high-density Cast Stone mix, comprised primarily of water, sand, stone aggregate and cement. All available patinas are hand applied to the surface of the product. Cast Stone produces a strong and durable product that will weather naturally in an outdoor environment.
WARNING: California Residents - Prop 65