Product Overview
#7 Stopper required for Campania International Fountains
The #7 Stopper for the Campania International Fountains is a single hole rubber stopper made to accommodate the pump cord and fits at the bottom basin of every fountain. This size should be purchased after checking the assembly instructions for your fountain -insuring that it is the correct size for your fountain. The stopper has a small slit in the side of the rubber that allows the cord to pop in place prior to placing in the basin hole. Once in place the Stopper can be pressed into the hole with the butt end of a screwdriver. Once secured in place the Stopper and cord should be tight and close to flush with the fountain's surface. For added insurance against leaks we recommend silicone around this area, allow it to dry for at least 24 hours before adding water.
For additional assistance please email customercare@garden-fountains.com
- Only rated for Campania International Fountains.
- Made of rubber and should be firmly pressed into the bottom hole of fountain basin.
- Small slit in the side to pop the cord into the hole.
- Check your fountain instructions for the correct part.
